In the analog automation, and the ingredients to be processed and mixed to create the final product. As in the case of the discrete automation and product manufacturing is not permitted within a single process.
Take ice cream, for example. The company can mix, heavy cream, half egg yolks, sugar, and salt in a kitchen dish is to make the base for the ice cream. This can then be sent on to Company B, which will be combined with flavors like vanilla, strawberry, and chocolate. While the components of the product have been made to separate, and the product is handled and did not involve himself in the creation of the ice cream. This is just one of the many examples of this.
Take it easy a procedure to show that an analogue of process automation. I will tell you about the water purification process. The first thing you’ll need to have our waste water treatment plant, water. Let’s assume that our facility has a variety of water sources, a reservoir, a lake, and a number of underground wells. And, of course, who doesn’t want a drink of water out of the tank, and the thought of drinking a bit of water, but the most snobbish of fish, and, of course, the majority of the people.
These sources will require cleaning and disinfection, it is not only because we prefer to, but because the act is usually like this. We have been providing water to the plants, and that it is not so desirable, and it’s the first thing we want to do is remove it from the “big stuff”. It can be leaves, sticks, debris and even small fish or other animals into the water, and is the first line of defense for the removal of those things that can have a nervous system.
As soon as the water leaves the filter in the system, you can have a fast mixing process, where it will be used to balance the pH, if necessary, as well as how to add special chemicals to ensure that the molecules of the water of the application, and a dust of larger particles, referred to as petals of a flower. The petals of a flower can be go to the pool, where everything slows down a little bit, and the petals of a flower that can still grow.
Following the herd will take time to develop, you can use the pump to a different pool, where it was allowed to settle. This process is the large flakes sink to the bottom of the pool, and it has to be removed, while the top of the water to flow out of the swimming pool is a kind of filtration system. The filtration system is made mostly from gravel, sand, and a kind of coal called anthracite.
If water is not flowing through these levels, the smaller the molecules, and organisms are removed from the water. Then, the water can enter the disinfection system. It can be as complex as for any other type of filtration system, such as membranes, UV, reverse osmosis, ozone, or of a different type. The disinfection process is largely dependent on the quality of the water, and the ability to remove particles and organisms. If there are, either bacterial or viral problems, and if the water is small, and it doesn’t taste very friendly and helpful, these are the problems, which may require additional treatment. If the problems are reduced to a minimum, disinfection, it can be as simple as adding chlorine to the water to make sure that any other items are to be removed. The government is generally required that a number of the chlorine before the water in the distribution system. As soon as the water is properly disinfected, you can turn it into a container that is used for the storage of the final product, whether it is water that can be pumped up to the junction for the switching devices in the line all the way to the city’s needs.
Other examples of analog, automation, continuous flow of oil and gas, pulp and paper, chemicals, and so on. While the majority of these products are to be measured, to some extent, a gallon of gas in a quarter of the olive oil in a drum of chemicals, but again, this is definitely not treated as a separate automation is a consequence of the way in which the process has been dealt with. How to create a widget, which is derived from a company, it is a lot easier to quantify than that of a water treatment product. The definition of an analogous process automation, it is more related to what is happening in order to get the final result. Analog automation is the process of a mix of things, whilst the discrete automation, it is more about the installation of the various components of the final product. As I have already mentioned in the discussion of the discrete automation and the start and stop of the process of automation can be carried out by using the discrete and analog system. however, with the start and stop of the discrete process is as simple as stopping a car. How to start and stop the analog process automation requires careful planning, but also in the preparation process. For example, in order to stop the water treatment facility, the city must first find out where the water is the place to come. If there is a lot of potential for other urban waste-water treatment plants, the city may wish to consider a number of short and long-term options, such as the filling of the tanks are at full capacity and will to ensure that it’s time to stop, and resume of the process is carried out in a relatively short period of time.
L
Let’s just say that this was the option that was selected earlier. First, you will need to stop it with the power of plants. This may not be an easy one. If it has a motor-driven control valve, then you can use this valve to close and the start of the process in order to stop it. If they are not, the motorized valve, the staff would have to go to the boiler’s location and manually close the door. Although it may seem relatively easy, and some of these shut-off valves in the pipes, with a diameter of 96 cm. It was, indeed, a very big mouth, so you might be able to manually turn on until it is completely closed. As soon as this procedure is complete, the staff will be forced to come to a stop with the addition of any chemical substances, and, where appropriate, the removal of the quick to mix a swimming pool. The reason for the draining of the pool, that is, the flocculant will sink to the bottom of the pool and will cause a lot of problems for the fluid to be pumped to the next station, as well as for the operation of the equipment. Of course, if you have to drain the pool, it is possible they will need to have in order to dry up, and the swimming pools of the same reasons. The filters that are needed in order to dry, as the water in the filter, it would be to create the conditions for the reproduction of the algae, and other unwanted substances. In other words, all of the processes that are required for the wastewater treatment plant can be affected by both short-term and long-term costs. As you can imagine, the consequences, and the exceptions that can be substantially larger in the case of analog, automation, in the case of the discrete automation.